4 Comments for 'How do i make a dining room table out of an old wooden door?'

1.  
   smartypants909
   July 13, 2009 | 6:39 pm
    

   I would sand and stain the door and put it on two sawhorses.
   References :

2.  
   whatever66
   July 13, 2009 | 7:03 pm
    

   the door is the tabletop, make some nice legs for it, then throw an ax in the center of the door for a center piece.

   engrave in it, fire door, this door must be closed at all times by order of the fire marshal.
   References :

3.  
   daydreamin_sweetheart
   July 13, 2009 | 7:29 pm
    

   take the door, cut it in whatever shape you want(square/circle)..if u want it rectangular keep it as is just shorten it as much as you want… go to the hardware store get one or 2 2×4’s… depending on the length of the table.. put them on each corner or every so many inches apart.. than screw them in(use atleast 2 screws just to be safe)…paint it whatever colour you want… i would suggest painting it brown with like black marks(representing burntness)…i unno not the best plan but it would work…just be cre4ative with your shaping and so on…if your talented you could shape it like a fire fighting hat. so ya…have fun with your project and good luck!
   References :

4.  
   justcurious
   July 13, 2009 | 8:04 pm
    

   put legs on it
   References :

Leave a comment